range

Limit a number within a specified minimum and maximum range.

API

range

Return

Argument	Description	Type
number	Clamped number	number

Parameters

Parameter	Description	Type	Default
num	Number to clamp	number	Required
min	Minimum value	number	0
max	Maximum value	number	1

Example

Basic Usage

import { range } from 'ranuts';

console.log(range(5, 0, 10)); // 5
console.log(range(15, 0, 10)); // 10 (clamped to max)
console.log(range(-5, 0, 10)); // 0 (clamped to min)

Percentage Clamping

import { range } from 'ranuts';

const progress = 150; // 150%
const clamped = range(progress, 0, 100);
console.log(clamped); // 100

Custom Range

import { range } from 'ranuts';

const value = 25;
const clamped = range(value, 10, 20);
console.log(clamped); // 20 (out of range, clamped)

Color Value Clamping

import { range } from 'ranuts';

const red = 300; // RGB value should be 0-255
const clamped = range(red, 0, 255);
console.log(clamped); // 255

Notes

1. Clamping logic: If number is less than minimum, returns minimum; if greater than maximum, returns maximum; otherwise returns original value.
2. Default range: Default range is 0 to 1, suitable for handling percentages or ratio values.
3. Use case: Commonly used to limit user input, calculate progress values, color values, etc.

Interpolation & remapping

Shader-style interpolation and range-remapping — the same primitives GLSL's mix/clamp/smoothstep provide, useful for animation easing, mapping a scroll position to an opacity, or converting between unrelated numeric ranges.

clamp

Same behavior as range above, with GLSL-style argument order: clamp(value, min, max) vs range(num, min, max). Added alongside the rest of this cluster for parity — pick whichever argument order reads better at the call site.

import { clamp } from 'ranuts/utils';

clamp(150, 0, 100); // 100
clamp(-10, 0, 100); // 0

lerp / inverseLerp

lerp(a, b, t) interpolates from a to b by t (t=0 → a, t=1 → b). inverseLerp(a, b, value) is its inverse: given a value between a and b, returns where it sits as 0..1. Neither is clamped — t (or the result) can go outside 0..1 if value is outside [a, b].

import { lerp, inverseLerp } from 'ranuts/utils';

lerp(0, 100, 0.25); // 25
inverseLerp(0, 100, 25); // 0.25
inverseLerp(0, 100, 150); // 1.5 — not clamped

Parameters

Function	Parameter	Description	Type
lerp(a, b, t)	a, b	Start / end value	number
	t	Interpolation factor	number
inverseLerp(a, b, value)	a, b	Start / end value	number
	value	Probed value	number

remap / fit

remap(value, a1, a2, b1, b2) linearly maps value from [a1, a2] onto [b1, b2], unclamped. fit is the clamped version — the shader fit: the same remap, then clamped into the output range.

import { remap, fit } from 'ranuts/utils';

remap(5, 0, 10, 0, 100); // 50
remap(15, 0, 10, 0, 100); // 150 — outside [0,10], so outside [0,100] too

fit(15, 0, 10, 0, 100); // 100 — clamped to the output range

linearstep / smoothstep

Both ramp from 0 to 1 as x goes from edge0 to edge1, clamped outside that range. linearstep is a straight line; smoothstep is the GLSL Hermite-smoothed curve (3t² - 2t³) — an ease-in-ease-out instead of a linear ramp, the usual choice for animation and shader fades.

import { linearstep, smoothstep } from 'ranuts/utils';

linearstep(0, 1, 0.5); // 0.5
smoothstep(0, 1, 0.5); // 0.5 (midpoint is the same; the curve differs elsewhere)
smoothstep(0, 1, 0.1); // 0.028 — eased, slower to leave 0 than linearstep's 0.1

Notes

1. Not clamped: lerp, inverseLerp, remap. Feed them a value/t outside the expected range and you get an extrapolated result, not an error or a clamped one.
2. Clamped: fit, linearstep, smoothstep. These three always return a value within their output range.
3. linearstep(edge0, edge1, x) with edge0 === edge1 returns 0 for x < edge0, 1 otherwise, rather than dividing by zero.